GLOBAL ASSISTIVE DEVICES Vibra LITE 12 Instruction Manual page 3

9) Use the "ST/STP" button to reset the seconds to zero (00) if
necessary.
10) Press the "MODE" button. The day/date of the month will be
flashing.
11) Use the "ST/STP" button to set the day/date. (1-31)
12) Press the "MODE" button. The month will be flashing.
13) Use the "ST/STP" button to set the month. (1-12)
14) Press the "MODE" button. The last two numbers of the YEAR
will be flashing.
15) Use the "ST/STP" button to set the year.
16) Press the "MODE" button. The number "12" or "24" will be
flashing. (12 = AM/PM 12 hour time OR 24 = military 24 hour time).
17) Use the "ST/STP" button to set the time format.
18) Press the "MODE" button. The letters "MM:DD" OR "DD:MM" will
be flashing. (Month followed by Day/Date of the Month ="MM:DD"
OR Day/Date of the Month followed by Month = "DD:MM").
19) Use the "ST/STP" button to set the DATE format.
20) Press the "SET/RST" button to save programmed information.
Note: When setting the Calendar Mode, if programming is
interrupted and no button is pushed within 2 minutes, the flashing