Advertisement
Quick Links
VIBRATION WATCH
with:
Vibration Alarm
won't disturb others.
Beep Alarm
option
Auto Reload Countdown Timer
can be
set for seconds, minutes & hours. Use for
reminders such as medical conditions,
medication, timing presentations or procedures,
parking, cooking. Will automatically reload to
preset countdown time.
Electro-Luminescent backlight
For viewing display at night
Second Clock
great when traveling in a different time zone.
Two Alarm Settings
use for daily reminders, wake up, snooze, medication
Hourly Alert/Chime
Option
12 or 24 Hour clock
Stopwatch
OPERATING MODES
Your watch has six operating modes:
To go from one operating mode to another,
repeat pressing the MODE button for each
mode to be displayed. The operating modes
will rotate in the order as listed above.
TO BECOME FAMILIAR WITH THE
OPERATING MODES & THEIR SYMBOLS,
ROTATE THROUGH EACH MODE BY
PRESSING THE „MODE" BUTTON.
FIRST TIME SETTING OF YOUR
CALENDAR/CLOCK
(You must have this set for your Alarm Settings to be accurate.)
When setting the Calendar & Clock, the rotation for setting is Seconds, Hour, Minutes,
12/24Hr, Date, Month, Day of Week. ONLY when the digits are BLINKING can you set or
change the setting. The clock will stop blinking when no button is pressed for two
Advertisement
Related Manuals for GLOBAL ASSISTIVE DEVICES VibraLITE 3
Summary of Contents for GLOBAL ASSISTIVE DEVICES VibraLITE 3
- Page 1 VIBRATION WATCH with: Vibration Alarm won't disturb others. Beep Alarm option Auto Reload Countdown Timer can be set for seconds, minutes & hours. Use for reminders such as medical conditions, medication, timing presentations or procedures, parking, cooking. Will automatically reload to preset countdown time.
- Page 2 minutes. You cannot switch to another mode of operation while the display is blinking. To exit and stop the blinking, push LAP/RESET button. 1. Repeat pressing the MODE button until the CALENDAR CLOCK operating mode shows on the display. 2. Press & Hold the LAP/RESET button until the second‟s digits begin to BLINK. Press the START/STOP button to reset the second‟s display to 00.
- Page 3 4. Press the LAP/RESET Button when finished. The display will stop blinking. The set icon will show on the display. Your alarm is set. When A1 Alarm is set the icon shows beside the PM indicator under Alm1. When A2 Alarm is set the icon shows on the display beside the A1 icon under Alm2. Note: Calendar Clock Time must be set for Alarm Time activation to be correct.
- Page 4 HOW TO USE THE COUNTDOWN TIMER 1. Repeat Pressing the MODE button to display TR (COUNTDOWN TIMER) operating mode. 2. Press & Hold the LAP/RESET Button until the Seconds digits BLINK. Press the START/STOP button to set to the seconds wanted. You can select from 0 to 59 seconds.
-
Page 5: How To Use The Stopwatch
Push the LAP/RESET button once, and the digits will stop flashing. (If you do not push the LAP/RESET button to stop the flashing, the digits will stop flashing automatically after 2 minutes.) To activate the start of the countdown when you need it, push the START/STOP button once. -
Page 6: Battery Information
ONE YEAR LIMITED WARRANTY Your VibraLITE 3 is warranted to be free from defects in material or workmanship for One Year from the date of purchase. This is a limited warranty and covers watch functions only. -
Page 7: Quick Reference
HOURLY ALERT SETTING Press the MODE button until display is in an ALARM Mode. (A1 or A2) Repeat pressing the START/STOP button until the Hourly Chime icon shows. (Located beside the A2 icon) GLOBAL ASSISTIVE DEVICES, INC Oakland Park Florida USA Copyright:...