Option Mode - GLOBAL ASSISTIVE DEVICES Vibra LITE 12 Instruction Manual

Starting/Stopping the Countdown Timer:
1) While in the selected Countdown Mode Screen, press the
"ST/STP" button to start the countdown. The countdown timer icon
located in the box at the right side of the screen will be flashing.
2) Press the "ST/STP" button to stop the countdown. The time
remaining will be displayed.
Note: When Countdown time is set to REPEAT and the alert is
currently activated, press the "ST/STP" button twice to stop the
countdown.
3) Press the "ST/STP" button to resume counting down.
Quick Reset of Original Countdown Time:
1) Hold down the "SET/RST" button until the previously
programmed countdown time is displayed on the screen.
2) Press the "ST/STP" button to restart at previously set time.

OPTION MODE:

 VIBRATION and SOUND alerts can be turned "ON‟ or "OFF".
The alerts that are turned ON will be activated by the preset Daily
Alarms, Countdown Timers, Hourly alert and Button push.