To Set Alarm - GLOBAL ASSISTIVE DEVICES VibraLITE 8 User Manual

TO SET ALARM 1

Push MODE Button to rotate to ALARM MODE
ALARM 1 OFF will show on display when an alarm time
has not been set or when the alarm has been turned OFF.
Push MODE Button. Minutes will flash.
Push START/STOP Button to rotate to the minutes to correct alarm time.
Push LAP/RESET Button when alarm time is correct. Flashing will stop.
Numbered Alarm Icon (1) will show at bottom of display screen to
show alarm is set.
TO SET ADDITIONAL ALARMS (2-8)
While in ALARM MODE, select the alarm you wish to set by pushing the
LAP/RESET Button to rotate to that Alarm number. (Rotates 2–8).
Push & Hold LAP/RESET Button. HOLD TO SET will show on the display.
Hold until hours flash.
Continue as above to set hours and minutes by advancing numbers with the
START/STOP Button and changing from Hours to Minutes with the MODE
Button.
Push LAP/RESET Button when correct hour and minute for alarm has been
entered.
Numbered Alarm Icon at the bottom of the display will show for Alarm Set.
TO CHECK ALARM SETTINGS
Push MODE Button to rotate to ALARM MODE.
ALARM 1 will show the alarm set time.
Push LAP/RESET Button to rotate through Alarms. (1 thru 8)
TO CHANGE ALARM SETTINGS
Push MODE Button to rotate to ALARM MODE.
ALARM 1 will show the alarm set time.
Push and Hold LAP/RESET Button, HOLD TO SET will
show on display. Hold 3 seconds until Hours flash.
Push START/STOP Button to rotate the hours to correct
alarm time. NOTE: IF USING A 12 HR CLOCK SET FOR
AM OR PM AS REQUIRED.
Vibra LITE 8 is a trademark of GLOBAL ASSISTIVE DEVICES, INC. Page 5