LG LDG3015SB Service Manual page 39

REMOVE THE OVEN V
REMOVE THE OVEN V
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply and gas supply
going to the range.
2. Pull the range away from the wall so you can
access the pipe of the unit.
3. To remove the oven valve:
a) Remove the rear back covers and safety valve
cover (see step 5, 6 on page 3-2).
b) Remove the 4 fittings.
4 fittings 4 fittings 4 fittings 4 fittings 4 fittings 4 fittings 4 fittings
4 fittings 4 fittings
4 fittings 4 fittings
4 fittings 4 fittings 4 fittings 4 fittings
4 fittings 4 fittings 4 fittings 4 fittings
4 fittings 4 fittings
4 fittings 4 fittings 4 fittings 4 fittings 4 fittings
COMPONENT ACCESS
& GAS REGULA
& GAS REGULA
3 connectors
AL VE (SAFETY V
AL VE (SAFETY V
T OR
T OR
c) Remove the 3 connectors.
d) Remove the 3 screws and than lift the oven
valve.
4. To remove the gas regulator:
a) Remove the 2 fittings and a gas supplier
fitting.
2 fittings 2 fittings 2 fittings
2 fittings 2 fittings 2 fittings 2 fittings
2 fittings 2 fittings 2 fittings 2 fittings 2 fittings 2 fittings
2 fittings 2 fittings 2 fittings 2 fittings
2 fittings
b) Remove the 4 screws from the wool cover
back.
3-26
AL VE)
AL VE)
Gas supplier Gas supplier Gas supplier
Gas supplier Gas supplier Gas supplier Gas supplier
Gas supplier Gas supplier Gas supplier Gas supplier Gas supplier Gas supplier
Gas supplier Gas supplier Gas supplier Gas supplier Gas supplier
fitting fitting fitting fitting fitting
fitting fitting
fitting fitting fitting fitting fitting fitting
fitting fitting fitting fitting fitting
Wool cover back