LG LDG3015SB Service Manual page 29

REMOVING THE LA
REMOVING THE LA
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply and gas supply
going to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Remove the rear back cover (see step 5 on
page 3-2).
4. Disconnect the wires from the latch drive motor
and switch.
5. Remove the 2 mounting screws from the latch
drive.
2 screws 2 screws 2 screws 2 screws 2 screws
2 screws 2 screws
2 screws 2 screws 2 screws 2 screws 2 screws 2 screws
2 screws 2 screws 2 screws 2 screws 2 screws
COMPONENT ACCESS
TCH DRIVE ASSEMBL
TCH DRIVE ASSEMBL
(For the Lower oven only)
(For the Lower oven only)
6. Remove the 3 mounting screws from the latch drive.
7. Unhook the Latch rod from the cam.
3-16
Y
Y
3 screws 3 screws 3 screws 3 screws 3 screws
3 screws 3 screws
3 screws 3 screws 3 screws 3 screws 3 screws 3 screws
3 screws 3 screws 3 screws 3 screws 3 screws