Makita BTD129 Technical Information page 12

W
iring diagram
Fig. D-5
By fastening four screws, assemble Printed wiring
board to Insulator without wobbling.
Note: The screws must be tightened to 0.3N·m of
torque.
Four Screws
Wiring and Mounting of
Printed Wiring Board to Stator
Printed wiring board
Lead wires of Printed wiring board must be faced
to the opposite side of Lead wires of Stator.
Insulator
Lead wires
of Stator
P 12/ 12
Stator
Printed wiring board
Four Screws
Lead wires of
Printed wiring board