Operating When On The Move (Remote Operation) - Siemens Gigaset C285 User Manual

Hide thumbs Also See for Gigaset C285:
Table of Contents

Advertisement

Changing the language of voice
prompts and prerecorded
announcements
You can select English, Spanish, or French
as the language of voice prompts and pre-
recorded announcements. You can select
different languages for line 1 and line 2.
¢
Answer Machine
§Menu§
¢
¢
Voice Language
/
/
English
Español
Français
Select a language and press
.
§OK§
Operating when on the move
(remote operation)
You can check or activate the answering
machine from any other telephone (hotel,
pay phone, etc.).
Requirements:
u
The phone you are using for remote
operation must have tone dialing
(DTMF), so that you hear different
tones when you press the keys.
u
You must activate
Activating Remote Access
¢
Answer Machine
§Menu§
¢
Remote Access
On
/
Off
Select and press
your selection.
Calling the answering machine and
playing back messages
~
Dial your own number.
; ~
While listening to your
announcement, press the ;
key and enter the system PIN
(default setting: 0000,
see page 30).
¢
Settings
Line 1
/
Line 2
Remote
Access.
¢
Settings
to confirm
§OK§
Operating the answering machine
You will be informed whether any new
messages have been recorded. The mes-
sages are then played back. You can now
operate the answering machine using the
keypad.
Operating the answering machine using
the keypad
The following keys are used:
0
Delete the current message.
A
Repeat the previous message.
B
Play the message.
3
Skip to the next message.
G
Turn on the answering machine.
H
Stop message playback.
9
Turn off the answering machine.
;
Enter the remote access code if
the answering machine is on.
Note:
After message playback, if no key operation
is detected for 10 seconds, the call will be
terminated.
Activating the answering machine
~
Dial the number of the line
you want to activate answer-
ing machine for.
¤
Allow the phone to ring until the ring
back tone stops and the phone answers
with a beep.
~
Enter system PIN (default set-
ting: 0000, see page 30).
u
If messages are stored on the answer-
ing machine:
The answering machine starts play-
back.
¤
Press the H key to stop playback.
¤
After the beep press the G key to
activate the answering machine.
Or
23

Advertisement

Table of Contents
loading

Table of Contents