Table of Contents
Advertisement
1 Numeric key pad
2 Control key
t Access to Calls list.
s Access to directory.
3 Display keys (page 13)
4 Display in idle status
Ê ,Ë – Flashes when the respective line
is receiving an incoming call.
– Is on when the respective line is
– Off the hook
– In external talk mode
– On hold or in use mode
– Is displayed in the Calls list to
show the line on which the call
came in.
Õ
Flashes when the answering
machine is on.
É
Flashes when the answering
machine's message memory is full.
×
Flashes when the answering
machine is controlled by a handset.
Å
Is on when the ring tone volume of
the base station is set to zero
(see page 30).
5 Answering machine On/Off key
Activate/deactivate answering machine.
6 Volume keys
– In idle mode: change the ring tone vol-
ume of the base station.
– During message playback: change the
volume of playback.
– During call: change the volume of the
loudspeaker.
– During call screening: change the vol-
ume of call screening.
7 Erase key
Erase the current message during playback.
Erase all old messages (press and hold in idle
mode).
8 Start/Stop key with integrated LED for
Line 1/Line 2
Start/stop playback.
LED status indicator:
– Is on when playing messages on the
respective line.
– Flashes slowly when there is at least one
new message on the answering machine
for the respective line.
– Flashes rapidly when the message mem-
ory for the respective line is full.
The base station at a glance
9 Redial/Pause key
Open redial list (in idle status) or insert a
dialing pause (when editing a number).
10 Page key
Page handsets (press briefly).
Start the registration procedure (press and
hold in idle mode). You will hear a beep.
11 Mute key
Mute/unmute microphone.
12 Intercom/Hold/Conference key
Set up an internal call.
Switch between an external call and internal
party (handset/base station), or transfer a
call during an external call.
Set up a conference call between an exter-
nal line and an internal party (handset/base
station). Press and hold the key in hold-
intercom mode.
13 Line keys
Answer an incoming call for Line 1/Line 2.
Make a call from Line 1/Line 2.
Start a second call from Line 2 while tele-
phoning from Line 1 (see page 25ff.).
LED status indicator:
– Flashes rapidly when the respective line
is receiving an incoming call.
– Flashes slowly when a handset is off the
hook on the respective line.
– Flashes very slowly when the respective
line is on hold on the base station.
– Is on when the base station is in talk
mode.
14 End Call key
End call, cancel function, return to idle sta-
tus.
15 Talk/Flash key
Answer or start a call.
Add a flash (in the directory)
Send FLASH (when off the hook).
Please remember:
u
If the answering machine is being oper-
ated from a handset, or if it is recording
a message, you cannot operate it from
the base station.
u
If the start/stop key flashes although
the answering machine is switched off,
it means that there is still at least one
new message that has not been played
back.
3
Advertisement
Table of Contents
