Glow-worm swift flow 100e Installation Instructions
Hide thumbs
Also See for swift flow 100e:
- Installation instructions manual (28 pages) ,
- Installation instructions (4 pages)
Advertisement
Installation Instructions
Digital Clock / Timer
Kit Style 1
This is a Cat I
These instructions are for the installation and setting of
the clock/timer.
Instructions on how to use and service are supplied with
the boiler.
Note. The boiler Installation Instructions will be
required should the clock/timer be fitted to an already
fitted boiler.
If the literature is not to hand, copies can be obtained
from:
Hepworth Heating Ltd.,
Nottingham Road,
Belper,
Derbyshire.
DE56 1JT
Telephone (01773) 824141
One Contact Total Service
T o b e l e f t w i t h t h e u s e r
Appliance
2H
Customer Services:
Tel: (01773) 828100
Fax: (01773) 828070
100e 80e 75e
100
80
It is important to quote the model, size and serial
number.
Hepworth Heating Ltd.,
Nottingham Road, Belper, Derbyshire. DE56 1JT
General/Sales enquiries :
Tel: (01773) 824141 Fax: (01773) 820569
221061A.02.97
75
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Glow-worm swift flow 100e
Summary of Contents for Glow-worm swift flow 100e
-
Page 1: Installation Instructions
221061A.02.97 Installation Instructions T o b e l e f t w i t h t h e u s e r 100e 80e 75e Digital Clock / Timer Kit Style 1 This is a Cat I Appliance These instructions are for the installation and setting of It is important to quote the model, size and serial the clock/timer. - Page 2 Clock/Timer CONTENTS OF KIT "continuation of “Boiler Fixing” CONTENTS OF KIT Remove two of the fascia securing screws, see diagram 1. 1 Casing label Remove the control housing securing screw and cover, 2 Instruction sheet see diagram 1. 3 Clock/timer Fit the clock/timer bracket and loosely secure with the two previously removed fascia securing screws, 4 Clock/timer bracket...
- Page 3 Clock/Timer Remove the clock/timer blanking plate from the outer CLOCK/TIMER MOUNTING case and use the new blanking plugs supplied. BRACKET Stick the Casing label, from the loose items pack, to the right hand side of the clock/timer. Note. Some adjustment of the clock/timer bracket may be required to allow for a satisfactory alignment of the outer casing.
- Page 4 Clock/Timer Setting the Clock/Timer With the electrical supply to the boiler switched on the clock will display the following: Clock Setting. 4 WAY TERMINAL Press “SET?” button. BLOCK The display will show “CLOCK SET”. Press the “YES” button. Press the “-” or “+” button until the correct day of the week is shown on the display.
Need help?
Do you have a question about the swift flow 100e and is the answer not in the manual?
Questions and answers