Leica M Instruction Manual page 101

FLASH UNITS
With a maximum guide number of 58 (at 105mm setting), an
automatically controlled zoom reflector (with coded Leica M lenses,
see p. 147), an optional second reflector, automatic short
synchronization with shutter speeds faster than
and many other functions, the Leica SF 58 system flash unit is both
powerful and versatile. Thanks to its permanently attached flash foot
with additional control and signal contacts, which are used to
automatically transfer a range of data and settings, it is very easy to
use.
With its compact dimensions and design that matches the camera,
the Leica SF 24D system flash unit is the perfect solution. Like the
Leica SF 58, it has a permanently attached flash foot with all contacts
and is also very easy to operate.
(SF 58: Order no. 14 488 / SF 24D: Order no. 14 444)
SCA ADAPTER SET FOR MULTIFUNCTION M HAND GRIP
The adapter set is made up of a rail and the SCA connecting cable.
Combined with an attached multifunction M hand grip, it provides TTL
controlled flash, even if the flash unit will not be attached to the
camera, e.g. for indirect illumination. It is also possible to use two
flash units simultaneously, one on the camera, one using the adapter
set.
(Order no. 14 498)
HAND GRIP M
As a practical accessory, we recommend the M hand grip, which
allows you to hold the Leica M extremely steadily and to carry it with
one hand. It is fitted in place of the standard bottom cover.
/ s for HSS flash, (Order no. 14 496)
1
180
MULTIFUNCTION M HAND GRIP
As for the M hand grip. The multifunction M hand grip is also
equipped with a GPS aerial, which enables the location coordinates to
be added to picture data. In addition, it has connections for data
transmission via USB cable, mains operation with AC adapter M, flash
firing with standard commercial synchronous cables and - in
conjunction with an SCA adapter set - TTL control of external,
compatible flash units.
(Order no. 14 495)
226