Page 1
Pacific reserves the right to make changes or improvements without notice. Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better serve you over the lifetime of the product. For quick and easy registration, go to:...
IMPORTANT SAFETY INSTRUCTIONS To ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not un- derstand, ask your supervisor. WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY.
Grounding Instructions This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
OPERATING PROCEDURES WARNING! For the safe operation of this machine follow the instructions given in this manual and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT! This machine is intended for commercial use.
OPERATING PROCEDURES OPERATION Plug the machine’s power cable into a properly grounded outlet (see Safety Instructions). Next, adjust the handle height to a comfortable position by pulling up on the handle adjustment lever as shown below. The machine will not start when the handle is in the upright position.
éviter la surchauffe . Si vous avez des questions concernant l' entretien de votre machine au sol , demandez à votre superviseur . FM-17EHD & FM-20EHD FLOOR MACHINES - WIRING DIAGRAM...
Page 7
APPLICATION DETAILS FOR PAD/BRUSH USE For best cleaning results, use the appropriate pad/brush for your cleaning application. If you need help sourcing the ap- propriate pads/brushes for your application, please contact your sales representative or if this is unknown, contact your supervisor.
Page 8
SUGGESTED SERVICE PART LISTING 17-INCH 20-INCH OPTIONS DESCRIPTION PART NUMBER Block, clamp, handle 531303 Bumper, 17-inch 481202 Bumper, 20-inch 481203 Capacitor, run 531505 Cord, electrical, 50-feet 908129 Driver, pad, 17-inch 505903 Driver, pad, 20-inch 505905 Grip, handle 533701 Housing, front 534201 Housing, rear 534202...
Page 15
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.