1. Manuals
  2. Brands
  3. Pacific Manuals
  4. Floor Machine
  5. FURY 21 HSB
  6. Operating & maintenance instructions

Pacific FURY 21 HSB Operating & Maintenance Instructions

Automatic burnisher
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
AUTOMATIC BURNISHER
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For new books write to:
Pacific
2259 S. Sheridan
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately
with the delivering carrier.
MODEL
FURY 21 HSB
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest product
information available at the time of publication. Pacific
Steamex reserves the right to make changes or improve-
ments to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER _________________________
DATE PURCHASED ______________________

Advertisement

Table of Contents
loading

Related Manuals for Pacific FURY 21 HSB

Summary of Contents for Pacific FURY 21 HSB

  • Page 1 The contents of this manual are based on the latest product and safe operation of this machine. Read this book care- information available at the time of publication. Pacific fully before starting the machine. Keep this book and tell Steamex reserves the right to make changes or improve- all operators to read the book.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS MACHINE! WARNING: To reduce the risk of fire, electric shock or injury: 1. You must have training in the operation of the machine before using it. READ THE INSTRUCTION BOOK.

  • Page 3: Operating Procedures

    OPERATING PROCEDURES WARNING! For the safe operation of this machine follow PAD INSTALLATION the instructions given in this booklet and the training given For Burnishing: Select the correct clean floor pad (your by your supervisor. Failure to do so can result in personal supplier can help you).

  • Page 4: Preventive Maintenance

    MAINTENANCE PREVENTIVE MAINTENANCE REPLACING THE FUSE 1. Move the Toggle Switch to the OFF position. The green WARNING! Always move the Toggle Switch to the OFF light should be off. position before performing any service, maintenance, pad 2. Lift and remove the Upper Hood Cover. changing or inspection of the machine.
  • Page 5 UNDER HOOD ELECTRICAL CONNECTIONS 36 VOLT SYSTEM...
  • Page 6 FURY 21 HSB...
  • Page 7 FURY 21 HSB PARTS LIST Item Part Number Description Qty. Item Part Number Description Qty. 864201 Lower Body Housing 962182 5/16-24x 1 HH Bolt 911290 Battery Condition Meter 962129 5/16-18x 5/8 HH Bolt 911291 RPM Meter W506D 5/16-18x 3/4 HH Bolt...

  • Page 8: Warranty Policy

    1. The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.

Table of Contents