Basic Functions - Hyundai TRC 568 User Manual

BASIC FUNCTIONS

Switching on/off: Save energy
Whether you are using mains or battery – For FM, pull out the telescopic antenna. Incline
supply,to a void unnecessary energy and turn the antenna. Reduce its length if the consumption
always adjust the source signal is too strong (very close to a transmitter).selector to off.
Všeobecný provoz
1. To select your sound source adjust the source selector to CD.MP3/OFF/FM/AM.
2. Adjust the sound with the VOLUME controls.
3. To switch off the set, adjust the source selector to off position.
RADIO
Radio reception
1. Slide the FUNCTION selector to FM/AM.
2. Rotate the TUNING control to find the desired stations.
3. When you have finished listening, slide the FUNCTION selector to the OFF position.
– For FM, pullout telescopic antenna. Incline and turn the antenna. Reduce its length if the signal
is too strong (very close to a transmitter)
– For AM the set is providet with a built-in antenna so the telescopic antenna is not needed.
Direct the antenna by turning the whole set.
CD Player
Playing a CD/Mp3 This CD-player can play Audio Discs, CD-R andCD-Rewritable. Do not try to
play CD-ROM, CDi, VCD, DVD or computer CD.
1. Adjust the source selector to CD. Display: shows "--" Briefly.
2. To open the CD door, press the CD door at the edge marked OPEN.
3. Insert a CD , CD-R or CD-RW with the printed side facing up and press the CD door gently
close.
4. Press PLAY/PAUSE on the set to start play back.
5. To pause playback press PLAY / PAUSE to resume, press PLAY/PAUSE
6. To stop CD playback, press STOP
Note: CD play will also stop when:
- you open the CD compartment;
- you select RADIO sound source;
- the CD has reached to the end.
Selecting a different track CD/Mp3
During playback you can use  or  to select a particular track.
• If you have selected a track number in the stop or pause position , press PLAY/PAUSE to start
playback.
• Press  once briefly for the next track, or press repeatedly until the desired track number
appears in the display.
• Press  once briefly to return to the beginning of a current track.
• Press  more than once briefly for a previous track.
EN - 26