Safety Vision SV-LCD70A Owner's Manual page 5

r
OPERATIONS
1
POWER (ON/OFF)
STAND-BY mode
1. When RED LED is turned on, it indicates the power is applied and
it is on stand/by mode.
2. The monitor is not turned off until the ignition key is at off position.
POWER-ON mode
1. Press to turn the monitor on.
2. Press
2
NOTE The monitor can also be switched on automatically using a TRIGGER
signal; For more information, see TRIGGER setting in the MAIN MENU.
2
- / +
Use
+
1. Press to decrease speaker volume.
2. Press to decrease speaker volume.
+
Use
+
3
UP/DOWN
Use
UP DN
1. Press to adjust TILT camera position upward.
UP
2. Press to adjust TILT camera position downward.
DN
* Available only when TILT camera is connected with TILT.MT setting on menu.
Use
UP DN
4
SOURCE
Use to select the display image.
SOURCE
(CAM1→CAM2
The OSD indicates which image is displayed on the screen.
5
MENU
MENU
1. Press the
MENU
to enter the Main Menu.
MENU
2. Press once to enter menu mode. Press again to exit from menu mode.
to turn the monitor into stand-by.
+
to adjust speaker volume.
to select the content in menu setting mode.
UP DN
to adjust TILT camera position.
to search the lists in
SOURCE
→ →
CAM3 CAM4
to enter the Display Menu, press and hold the
menu setting mode
→ →
AUX SPLIT2
5
1 POWER
- +
/
2
3 UP / DOWN
4 SOURCE
5 MENU
6 DAY/NIGHT SENSOR
.
→ →
SPLIT3 SPLIT4)