Table of Contents
Advertisement
STEP 6: The screws for the rotisserie drive motor bracket are screwed into the right side of the
grill housing. Remove the screws and install the rotisserie motor bracket as shown in the figure
below. Assemble the rotisserie skewer as shown in the figure below.
STEP 7: Attach propane gas tank to regulator inlet fitting by turning the quick coupling
nut clockwise as shown in figure below. LP gas cylinder must be fitted with a listed
overfill prevention device (OPD). Secure liquid propone gas cylinder to the slide out tray
using the gas cylinder retention screw.
ASSEMBLY INSTRUCTIONS
G18Y06P-1
9
Advertisement
Table of Contents
