How To Remove A Scsi Chain Terminator; How To Install A Scsi Chain Terminator - Digital Equipment DECstation 5000/100 Series Maintenance Manual

How to Remove a SCSI Chain Terminator

The last externally-mounted SCSI drive in a chain requires a
terminator on its unused connector. To remove the SCSI chain
terminator from the drive at the end of an externally-mounted
chain of SCSI drives:
Push the wire latches away from the terminator.
1.
Pull the terminator off the SCSI connector.
2.

How to Install a SCSI Chain Terminator

The last externally-mounted SCSI drive in a chain requires a
terminator on its unused connector. Install the terminator as
follows:
Firmly press the chain terminator onto the unused
1.
connector on the drive at the end of the chain.
Press the SCSI connector wire latches onto the SCSI
2.
terminator.
These instructions apply only to externally-mounted SCSI
Note:
drives. The internal SCSI cable includes a hard-wired terminator.
Service Operations 2–9