Table of Contents
Advertisement
Console Command Error Messages
Table C-3 lists the error messages that the console commands
can return.
Table C-3. Console Command Error Messages
Error Message
?EV:ev_name
?EVV:value
?IO:slot_number
/device
?IO:slot_number
/device
?PDE3: slot_number
?SNF: script
?TXT:
?STF (4: Ln#0 Kbd
self test)
?STF (4: Ln#0 Pntr
self test)
?STX: usage
?STX: error
?TFL:slot_number/test
?TNF:
C–30 Console Commands
Meaning
The specified environment variable does not exist.
The specified environment variable value is invalid.
An I/O device reported an error. Here, slot_number
represents the I/O device slot number and, device
represents an additional message about the error.
The module with the slot number represented
by slot_number does not recognize the device
represented by device.
The module with the slot number represented by
slot_number contains an early version of firmware.
The ROM chip must be upgraded.
The system did not find the script that was to be
run.
The name specified in the script command is not a
valid script name.
The keyboard self-test failed. This is an
information message and does not prevent the
system from automatically booting.
A pointing-device self-test failed. This is an
information message and does not prevent the
system from automatically booting.
A console command contained a syntax error. The
usage parameter lists the correct syntax.
A console command contained a syntax error. The
error parameter lists the incorrect portion of the
command.
A test failed. Here, slot_number represents the slot
number of the module that reported the error and
test represents the name of the failed test.
Test not found.
Advertisement
Table of Contents
Troubleshooting
