NEC E585 User Manual page 18

warming up mode�
2� In warming up mode, when the Display receives a signal from an external
VGA device, it switches automatically to on mode�
NOTE:
Note that in warming up mode, the Display does not switch automatically
to on mode even if a signal is input from an external device using HDMI,
component video or composite video�
If the power cord is unplugged during warming up mode, the Display will
starts in standby mode the next time it is turned on�
3� When the external device is connected to another terminal (HDMI,
component video, composite video), the NO SIGNAL menu is displayed
and 15 minutes later the Display switches to standby mode�
4� In standby mode, press the power button on the remote control or on the
side panel to switch the Display to on mode�
NOTE:
Note that in standby mode, the Display does not switch automatically to on
mode even if a signal is input from an external device using VGA, HDMI,
component video or composite video�
If the power cord is unplugged during standby mode, the Display will starts in
the same standby mode the next time it is turned on�
TIP:
When Home mode is set under Energy Options in the on-screen display
menu, the Display switches to power saving mode if no external signal is
input�
When Retail mode is set under Energy Options in the on-screen display
menu, the Display does not switch to power saving mode when no external
signal is input�
When On is set under Auto Power Off in the on-screen display menu, the
Display automatically turns off if the user does not operate the Display for
more than 4 hours�
When the sleep timer has been set in the on-screen display menu, the
Display automatically turns off after the set time has elapsed�
English-16