Navigating The On-Screen Menu; Video Menu - NEC E585 User Manual

Navigating The On-Screen Menu

Press the Menu button to display and Exit to close the main menu�
Use the Navigation Ring to navigate, select, adjust or confirm an item on the OSD (On
Screen Display) menu�
NOTE: Some features may only be available in a particular source mode�

Video Menu

This menu adjusts video items�
Picture Mode
Video
Brightness
Audio
Contrast
Setup
Color
Advanced Video
USB
Reset Video Settings
Adjust picture settings and customize picture quality
MOVE MOVE OK SELECT
1� Picture Mode
Enter this menu to select from
preset picture settings to optimize
your display's performance:
Dynamic / Standard / Energy
Savings / Theater / Custom�
2� Brightness
Adjust picture brightness from
0 100�
3� Contrast
Adjust picture contrast from
0 100�
4� Color
Adjust picture color from
0 100�
Advanced Video
5�
Select advanced video settings�
[Dynamic Backlight (DCR)]
Enhance the contrasts between
darkness and brightness to
optimization the picture�
[Color Temperature]
Select a choice from Cool,
Normal, or Warm�
Energy Savings
50
60
55
MENU RETURN EXIT EXIT
English-23
[Noise Reduction]
Set to reduce the video noise�
[Tint]
Adjust the hue (Red, Green,
Blue) of the picture from
R50 G50�
[Sharpness]
Adjust object edges to optimize
picture detail from 0
[Adaptive Contrast]
Set to automatically adjust the
picture detail and brightness�
[Aspect Ratio]
Adjust how the picture fills the
screen� Normal / Zoom / Wide /
Cinema
[Overscan (On/Off)]
Some video formats may require
different scanning modes in
order to best display the image�
On: Image size is larger than
what can be displayed� The
image edge will appear cropped�
Approximately 95% of the image
will be shown on the screen�
Off: Image size stays within the
display area� The whole image is
displayed on the screen�
NOTE: When you use a
computer with HDMI out, please
set "OFF"�
[Backlight]
Set the backlight brightness from
0 ─ 50.
6� Reset Video Settings
Reset Video settings to factory
default settings�
100�