Honda GX610 Owner's Manual page 31

SERVICING YOUR HONDA ENGINE
OIL FILTER CHANGE
1. Drain the engine oil, and retighten the drain bolt securely (see page
27).
2. Remove the oil filter, and drain the oil into a suitable container.
Discard the used oil filter.
p m q
Use an oil filter socket, rather than a strap wrench, to avoid striking
and damaging the oil pressure switch.
SEAL
OIL FILTER SOCKET
v
3. Clean the filter mounting base, and coat the seal of the new oil filter
with clean engine oil.
Use only a genuine Honda oil filter or a filter of equivalent quality
specified for your model. Using the wrong filter,
or
a non-honda
filter which is not of equivalent quality, may cause engine damage.
28