Some Dos And Donõ T On The Safe Use Of Equipment; Important Notes - VIETA VH-MS470BT User Manual

Some Dos And Don't On The Safe Use Of Equipment
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken if you are to
obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and interconnections
between the pieces of equipment) are properly made
and in accordance with the manufacturer's instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DO route the mains lead so that it is not likely to be
walked on, crushed, chafed, or subjected to excessive
wear and tear or heat.
DON'T remove any fixed cover as this may expose
dangerous voltages.
DON'T obstruct the ventilation openings of the
equipment with items such as newspaper, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON'T allow electrical equipment to be exposed to
dripping or splashing, or objects filled with liquids, such
as vases, to be placed on the equipment.
DON'T place hot object or naked flame sources such as
lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with
wood screws-to ensure complete safety always fit the
manufacturer's approved stand or legs with the fixings
provided according to the instructions.
DON'T use equipment such as personal stereos or
radios so that you are distracted from the requirements
of traffic safety. It is illegal to watch television whilst
driving.
DON'T listen to headphones at high volume, as such
use can permanently damage your hearing.
DON'T leave equipment switched on when it is
unattended unless it is specifically stated that it is
designed for unattended operation or has a stand-by
mode. Switch off using the switch on the equipment
and make sure that your family know how to do this.
Special arrangements may need to be made for infirm
or handicapped people.
22
DON'T continue to operate the equipment if you are in
any doubt about it working normally, or if it isdamaged
in any way-switch off, withdraw the mains plug and
consult your dealer.
ABOVE ALL,
- NEVER let anyone especially children push anything
into holes, slots or any other opening in the case - this
could result in a fatal electrical shock;
- NEVER guess or take chances with electrical
equipment of any kind
- it is better to be safe than sorry!
To achieve the utmost in enjoyment and performance,
please read this manual carefully before attempting
to operate the unit in order to became familiar with its
features, and assure you years of faithful, trouble free
performance and listening pleasure.

Important Notes

Keep instructions: the safety and operating instructions

should be retained for future reference.
Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat
radiating appliances such as electric heaters.
On top of other stereo equipment that radiate too much
heat. Places lacking ventilation or dusty places. Places
subject to constant vibration. Humid or moist places.
Make sure not to obstruct the ventilation openings.

Before turning on the power for the first time, make

sure the power cord is properly installed.
Mains plug is used as the disconnect device and it

shall remain readily operable completely.
The product shall not be exposed to dirpping or

splashing and that no objects filled with liquids, such as
vases, shall be placed on the product.
To completely disconnect the power input, the mains

plug of apparatus shall be disconnected from the main.
Unplug the unit from the wall outlet before storms
to prevent damage due to lightning and any power
fluctuation.
When the standby LED and display are not illuminated;

this inducates that the power switch is set to off or the
set is disconnected from the mains.
Minimum distances 10cm around the apparatus for

sufficient ventilations.
CD Microsystem