Listening To Radio Broadcasts - VIETA VH-MS470BT User Manual

Listening to Radio Broadcasts

You can listen to FM stations. Stations can be tuned in
manually, automatically or from preset memory storage.
Caution:
Before listening to the radio, please check that the FM
Antenna is correctly connected and adjusted for length
and direction.
Tuning in to a Station
1. Rotate the Source button on the unit or press the FM
button on the remote control. The word "TUNER" will be
displayed on the front panel.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the
control or on the unit for one second or more, the
frequency changes down or up automatically until a
station is found.
• Manual Tuning
Repeatedly press the
control or on the unit to change the frequency until you
find the station you want.
• Preset Tuning (Available only after the stations are
preset)
Repeatedly press the
control or on the unit to select the desired
preset number. Its band and frequency are displayed on
the front panel.
Program radio stations automatically
Note: You can program a maximum of 20 preset radio
stations.
In tuner mode, press and hold PROG button to activate
automatic. [AUTO] is displayed.
The unit stores all the FM radio stations automatically
and then broadcasts the first preset radio station.
Presetting Stations
You can manually preset up to 20 FM stations.
To tune in to the desired station:
1. Press the PROG button on the remote control, the prog
will be blink.
2. Press the /
select the preset number.
Note: If you select more than 20, the preset number will
be changed to "1" automatically.
3. Press the PROG button again to store the station. The
display will return to the broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to
store in memory with a preset number.
Note: If the unit is unplugged or if a power failure occurs,
the preset stations will not be erased after being stored.
/ button on the remote
/ button on the remote
/ button on the remote
button on the remote control to
To change the FM Reception Mode
Press the Mode button to select the Stereo or Mono
channel to receive the best FM reception mode.
FM Display Modes
Every time you press the DISPLAY button, the display
will cycle through the following display modes:
Station Name, Programme Type, Time, Radio Text,
Frequency,
The information is displayed on the lower segment of
the display.
Station Name
When an RDS station is received, the name of that
station will be displayed.
Programme Type
Programme type identification signal. (Example: News,
Rock, Classical music.)
Time
The RDS CLOCK system may not properly operate
in areas where RDS CLOCK service is not available.
Once RDS CLOCK service is available, the RDS CLOCK
system will commence operation.
Radio Text
This displays a station description.
Frequency
This shows the frequency of the current station, e.g.
89.80 MHz.
31
ENGLISH