Connecting The Speakers; Connecting Control Cable - VIETA VH-MS470BT User Manual

Connecting the Speakers

Connect the speaker cords between the terminals as
shown below.
Connect the cable with a white head to the (-) terminals
and cable with a red head to the (+) terminals.
For the speaker side:
1. Unscrew the speaker connectors.
2. For the left speaker, identify the speaker cable that is
connected to the left connectors on the main unit.
3. Insert fully the red end of a speaker cable into the red
(+) connector.
4. Screw the red (+) connector to secure the cable.
5. Insert fully the silver end of a speaker cable into the
white (-) connector.
6. Screw the white (-) connector to secure the cable.
7. Repeat steps 2-6 for the right speaker.
AC
The Amplifier
Right Speaker
Box
Rear View
Connecting Auxiliary Equipment
Connect the AUX IN 1 terminals on the rear of the unit to
the line output terminals on the auxiliary equipment with
an audio cable (no supplied) illustrated below.
The CD Player
AUX IN 1 AUX IN 2
ANTENNA
L L
R R
CABLE
AUX IN 1
L
R
Left Speaker Box
Rear View
CABLE
SPEAKER OUTPUT(6 )
Auxiliary equipment
FM
AUDIO OU T
R L
Connect the AUX IN 2 sockets on this unit to the audio
output sockets on the auxiliary equipment as illustrated
below.
The CD Player
AUX IN 1 AUX IN 2
ANTENNA
L L
R R
CABLE
AUX IN 2
L
R

Connecting Control Cable

Connect the control cable between the CD player and
the amplifier.
CABLE
AC
CABLE
SPEAKER OUTPUT(6
Connecting the Headphone
Connect a pair of headphones to the phone jack. No
sound comes out of the speakers.
Note: Be sure to turn down the volume before
connecting or putting on headphones.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Auxiliary equipment
FM
AUDIO OU T
R L
The CD player
AUX IN 1 AUX IN 2
ANTENNA
L L
FM
R R
The Amplifier
)
Amplifier
Headphone
29
ENGLISH