Connecting To A Tv With Hdmi Jack; Connect To The Assistance Equipment - VIETA VMD100LS Owner's Manual

Terminal board
for the DVD player

Connecting to a TV with HDMI Jack

Terminal board for the
DVD player
Terminal board
for the TV

Connect to the assistance equipment

Terminal board for the
291D-e(#EJS89S,re-11).p65
If reception is poor, connect the outside antenna.
Note:
Before attaching a 75 ohm coaxial lead (the kind with a round
wire going to an outside antenna), disconnect the supplied FM
wire antenna.
Caution:
To avoid noise, keep antennas away from the system, the con-
necting cord and the AC power cord.
HDMI connects untouched and uncompressed digital
transmission for the highest and crispest sound/image
quality.
It has plug and play capability using only one cable for
both audio/video output.
Use a HDMI cable (not supplied) to connect the HDMI jack
on the DVD Player to HDMI IN on a HDMI compatible de-
vice (e.g.; TV, Projector, Adaptor).
This DVD player has a groups of audio input terminals,
you can use signal line to connect audio input terminals
DVD player
of this unit and audio output terminals of assistance equip-
ment respectively, then you can hear the sound sources.
Terminal board
for the assistance equipment
4
- 4 -
2009-9-29, 17:48