MOTO GUZZI V1000 I-CONVERT Owner's Manual page 37

Operations are as follows:
ensure that all spokes are tightened and the
wheel is trued ;
• remove the whee l and suspend it on a fork ;
• lightly sp in the wheel several times and see
if it always stops in vario us positions, thus indi-
cating a correct balance;
• if one point of the whee l always stops at the
bottom , put a balance weig ht on the spoke oppo-
site this poin t ;
• repeat this operation until the wheel is cor-
rectly balanced, then fix the balance weights to
the spokes by means of pliers.
Balance weights are available by our dealers .
Tyres
Tyres are included in the components which
must be very carefully checked: as vehicle sta-
bility, riding comfort and even rider safety are
dependant on them. Therefore it is not advisable
to use tyres having less than 2 mm ('/' 6") thick-
ness tread.
An incorrect tyre pressure may affect the vehi-
35
cle stability and cause the tyre to quickly wear
out.
Recommend ed pressures are:
front wheel:
solo or with pillion
rear whee l :
solo
with pillion
kg / sqcm 2,1 (31 p.s.i.)
kg / sqcm 2,4 (32 p.s.i.)
kg / sqcm 2,6 (38 p.s.i.)
The above figu res are suggested for normal ri-
ding (cruising speed).
If using the motorcycle at constant high speed,
or on high ways, it is recommended to increase
pressure by 0,2 kg / sqcm (3 p.s.i.).