Makita DUR361U Instruction Manual page 15

Indicator lamps
Lighted Off
015658
NOTE:
• Depending on the conditions of use and the ambient
temperature, the indication may differ slightly from the
actual capacity.
Remaining battery capacity indication
(Country specific) (Fig. 9)
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining battery capacity indication
Battery indicators
(Battery 1 or Battery 2)
: On : Off
or
014809
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery may
have
malfunctioned.
Remaining
capacity
: Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the
battery
Abnormal indications during use
Battery indicator
: On : Off
Battery 1 Battery 2
014811
The indicators show various states using the remaining
battery capacity indication.
Power switch action
WARNING:
• Before inserting the battery cartridge into the tool,
always check to see that the switch trigger
actuates properly and returns to the "OFF"
position when released. Do not pull the switch
trigger hard without turning the lock-off lever. This
can cause switch breakage. Operating a tool with a
switch that does not actuate properly can lead to loss
of control and serious personal injury.
Push the power button on the housing so that the tool is
powered on and power indicator lights. (Fig. 6)
For model DUR361U (Fig. 10)
For model DUR362L (Fig. 11)
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided.
To start the tool, turn the lock-off lever and then pull the
switch trigger. Release the switch trigger to stop.
NOTE:
• After the power button is pushed and the tool is left one
minute without any operations, the tool is automatically
powered off.
Reversing Switch for Debris Removal
WARNING:
• Always be sure that the tool is switched off and
battery cartridge is removed before removing
Status
The tool may have
malfunctioned.
The tool may have
malfunctioned.
The protective function for
battery with star marking
operated (overheat).
Few remaining capacity,
charge the battery.
The tool detected an
abnormally high voltage.
Replace battery cartridge.
15