Specifications - Makita 2107F Instruction Manual

ENGLISH
(Original instructions)
1 Lock button
2 Switch trigger
3 Speed adjusting dial
4 Lamp switch
5 Loosen
6 Tighten
7 Protrusion
8 Lever
9 Blade
10 Bearing

SPECIFICATIONS

Max. cutting capacity
Blade size
Overall dimensions
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for cutting in wood, plastic and fer-
rous materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
PORTABLE BAND SAW SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessories contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Explanation of general view
11 Upper holder
12 Lower holder
13 Wheel
14 Press
15 Blade guide
16 Groove
17 Screw
18 Stopper plate
19 Blade
20 Cutting wax
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
H x W x L
Net weight
Safety class
ENE009-1
ENF002-2
GEA010-1
GEB005-5
21 Tire
22 Lip
23 Fluorescent tube
24 Lamp box
25 Tapping screw
26 Limit mark
27 Screwdriver
28 Brush holder cap
496 mm x 184 mm x 249 mm
2. Use only blades which are 1,140 mm (44-7/8")
long, 13 mm (1/2") wide, and 0.5 mm (.020")
thick.
3. Check the blade carefully for cracks or damage
before operation. Replace cracked or damaged
blade immediately.
4. Secure the workpiece firmly. When cutting a
bundle of workpieces, be sure that all work-
pieces are secured together firmly before cut-
ting.
5. Cutting workpieces covered with oil can cause
the blade to come off unexpectedly. Wipe off all
excess oil from workpieces before cutting.
6. Never use the cutting oil as a cutting lubricant.
Use only Makita cutting wax.
7. Do not wear gloves during operation.
8. Hold the tool firmly with both hands.
9. Keep hands away from rotating parts.
10. When cutting metal, be cautious of hot flying
chips.
11. Do not leave the tool running unattended.
12. Do not touch the blade or workpiece immediately
after operation; they are extremely hot and could
burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
2107F
120 mm dia.
120 mm x 120 mm
1.0 – 1.7 m/s
1,140 mm
13 mm
0.5 mm
6.0 kg
/II
5