Midland BT Next Conference Instruction Manual page 24

pairing). Every time you open the intercom connection to one person, the previous
connection will be closed.
The connection is not a "chain", when two persons are talking it is not possible to
break (interrupt) the communication by one of the other two units riding out of the
maximum distance range.
Pair the BT Next Conference to another BT Next Conference unit
To pair the BT Next C. to another BT Next C. unit, you must first enter the setup mode:
1. Turn off the unit
2. Press and hold down the middle button about 7 sec., until the Red light is on per-
manently.
3. Now press one of the three buttons (Forward, Middle or Rear) for 3 seconds depen-
ding on which button you would like use to open the intercom to the other unit.
The Blue and Red lights will flash.
4. Repeat the same procedure on the other unit, you don't need to use the same but-
ton, you can choose one of the three buttons not previously used.
5. When successfully paired, each unit will have the Blue light on for one second and
then go back to the setup mode (Red light always on). Now the unit is ready for
another pairing procedure, and you can pair another BT Next C. unit following the
same procedure, but using a different button.
If you don't have more devices to pair, you must exit the setup mode before you can
use the units:
› Double click on the Middle button, the Red light will turn off and the Blue light
will start flashing.
You can use now your BT Next C..
How to use the Intercom with more than two units
To use the intercom feature, be sure that all the units are turned on and correctly paired
together
Attention: For intercom communication between Driver and Passenger there is no need
to keep the flip-up antenna in the up position. For Bike to Bike intercom the antenna must
be in the upper position.
Manual activation
Press the button corresponding to the unit you would like to communicate with. After
about 4 seconds the intercom communication will open.
A- Manual activation
Mode Forward button
Intercom Short press: Open/Close intercom to paired
raider
The communication remains active until you press again the same button. To quickly
open the intercom to another person, just press the button corresponding to the other
unit, the intercom will be automatically closed and the new connection will be open
(see Table A).
Voice activation (VOX)
The voice activation feature can open the intercom only to the unit paired to the Middle
button. While no other communication is open, simply start talking and the commu-
nication will be open and remain active for all the time you are talking. If there is no
conversation the intercom will be closed after 40 seconds. If needed you can close the
intercom manually without waiting 40 seconds, pressing the Middle button.
If needed, you can disable the VOX feature simply by pressing the Backward button for
7 sec. A voice announcement will advise you when the VOX is disabled. To turn the VOX
on again, just press the same button and a voice announcement will advise you that the
VOX is now active. This setting is remembered also in you turn off the unit.
Hint: this feature is very useful when you have a specific person that you like to
talk to more often (for example your passenger). In this way you don't need to
press a button to open the communication.
Unit already busy
If you try to open a intercom connection to another person that is already talking with
some one else (or is in a middle of a phone conversation), you will hear a "busy" double
beep tone. Just wait sometime and try again, maybe this time the "line" is not busy.
The person who is called, will be advised that someone is trying to call and will hear a
voice announcement with the number of the button from which the request is coming.
In this way as soon as the first conversation is over, the person can easily contact the
caller by opening the intercom of the specific button number (indicated by the voice
announcement).
Middle button
Short press: Open/Close intercom to paired
raider
Long press: Change mode
1 2 3
Rear button
Short press: Open/Close intercom to paired
raider
Long press: Toggle on/off wired
Midland BT Next - 23