Brick Panel Installation; Facing; Finishing - Napoleon BGD40-N Installation And Operating Instructions Manual

24
6.3

BRICK PANEL INSTALLATION

Install the base panels as illustrated in steps 1-4, see "PEN-
INSULA INSTALLATION PROCEDURE" section. Both side
panels sit under the bracket tab. Holding the side panel in
position, bend down the tab to secure. DETAIL 6.
6.4

FACING

Combustible materials may be installed fl ush with the front of the appliance but must not cover any of the
black face-areas of the appliance. Non-combustible material (brick, stone or ceramic tile) may protrude in
these areas.
It is not necessary to install a hearth extension with this appliance.
When roughing in the appliance, raise the appliance to accommodate for the thickness of the fi nished fl oor
materials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower ac-
cess door and the installation of many decorative fl ashing accessories.
Objects placed in front of the appliance should be kept a minimum of 48" away from the glass front faces.
6.5

FINISHING

Refer to "FINISHING" section for complete instructions
regarding mantel requirements and installations, log
placement, glass door and upper and lower louvre at-
tachments.
W415-0811 / D / 08.16.12
DETAIL 5 & 6
DRYWALL
RETAINER
STEP 5
RETAINER
STEP 6
DRYWALL
5"
MIN