Resetting The Settings - Sony FDR-X1000V How To Use Manual

1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [VER.], then
press the ENTER button.
[57] How to use
Format
Formatting is the process of deleting all images in the memory card, and restoring the
memory card to its initial state.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [FORMT], then
press the ENTER button.
2. Press the ENTER button to display [SURE?] after [OK] has been displayed, then press
the ENTER button again.
Formatting starts and [DONE] appears when formatting finishes.
To cancel formatting, press the NEXT button or PREV button while [SURE?] or [OK] is
displayed to select [CANCL], then press the ENTER button.
Note
Save important images before formatting.
Do not perform any of the following operations while formatting.
Press a button.
Eject the memory card.
Connect/disconnect a cable.
Insert/remove the battery pack.
[58] How to use

Resetting the settings

You can reset the settings to their defaults.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [RESET], then
press the ENTER button.
2. Press the ENTER button to display [SURE?] while [OK] is displayed, then press the
Changing the Settings
Changing the Settings
Camera settings
Camera settings