Sony FDR-X1000V How To Use Manual page 67

When shooting movies, or shooting in Interval photo recording mode
During movie playback
When Wi-Fi connection is being established, Wi-Fi remote control is connected, an image is being
uploaded to a smartphone, or live streaming
HDMI connection is being made.
Supplying power from a connected USB device
Connecting a mass storage device
IR-remote control is set to ON.
In the following cases, even if you have selected [20sec] or [60sec] in the auto power off
function, the time that elapses before the power turns off will be extended.
While adjusting [SETUP] settings
While playing back still images
When [Wi-Fi] is set to [ON] and the Wi-Fi icon is displayed.
[51] How to use
Beep
You can set the audible notification of operations ON/OFF.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [BEEP], then
press the ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
ON: All operation sounds are enabled.
SILNT: Operation sounds are emitted for the following operations only.
Power turned on
Recording started
Recording stopped
Shutter pressed
A disabled operation was selected or an error occurred
Wi-Fi connection confirmation beep
Changing the Settings Camera settings