Sony FDR-X1000V How To Use Manual page 71

[55] How to use
Switching NTSC/PAL
You can select the NTSC/PAL setting, depending on the TV system of the country or region
where you use this camera.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [V.SYS], then
press the ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
NTSC: Select this when the TV system is NTSC.
PAL: Select this when the TV system is PAL.
BACK: Returns to the [V.SYS] menu.
3. Press the NEXT button or PREV button, then press the ENTER button while [OK] is
displayed on the display panel.
To cancel the NTSC/PAL setting, press the NEXT button or PREV button while [OK] is
displayed to select [CANCL], then press the ENTER button.
Note
When you change the NTSC/PAL setting, the camera will restart automatically.
[56] How to use
Version
Displays the software version of the camera.
Changing the Settings
Changing the Settings
Camera settings
Camera settings