Stony Creek Log Placement - Monessen Hearth NB18 Installation And Operating Instructions Manual

Vented/unvented gas log set
Table of Contents

Advertisement

GRATE AND LOG INSTALLATION
STONY CREEK SC18/24/30-R LOGS
PLACEMENT
1. Place bottom log (#1) on two (2) pins on rear of grate
assembly and push towards rear as far as possible.
Figure 27
Figure 27
2. Place the ember chunk (#2) with notch on both ends
on the grate bar right side of the burner adjacent to the
controls. Push towards rear as far as possible. Figure
28
3. Place the ember chunk (#3) with notch on one end on
the grate bar left side of the burner with notch towards
rear. Push towards rear as far as possible. Figure 28
Ember Chunk
Log #3
(Notch on
one end)
Figure 28
4. Place front bottom right log (#4) on right pin located
on burner and right grate bar. Figure 29
Figure 29
81D0107
Bottom Rear Log #1
Ember Chunk Log #2
(Notch on both ends)
Front Bottom Log #4
5. Place front bottom left log (#5) on left pin located on
burner and left grate bar. The right side of the log
should rest on log #4. Figure 30
6. Place mid right log (#6) on bottom rear log (#1) and
front bottom right log (#4) by placing notch on bottom
of log on locating block on log #1. Place front of log in
notch of log #4. Figure 30
Front Bottom Left
Log #5
Figure 30
7. Place mid rear log (#7) on bottom rear log (#1) and mid
right log (#6) by placing notch on bottom of log onto
locating block on log #1. Right side of log will rest on
log #6. Figure 31
Mid Rear Log #7
Figure 31
8. Place mid left log (#8) on mid rear log (#7) and front
bottom log (#5) by placing notches on bottom of log
onto locating blocks on log #7 and log #5. Figure 32
9. Place center log (#9) onto front bottom left log (#5) by
placing notch on bottom of log #9 onto locating block on
log #5. The fl at triangle-shaped end of log #9 should be
towards front with pointed end of log resting on bottom
rear log (#1). Figure 32
NB18/NB24 Gas Log Set
Mid Right Log #6
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nb24Nb18scrNb24scr

Table of Contents