Log Placement - Monessen Hearth Mojo Series Installation & Owner's Manual

B.

LOG PLACEMENT

1. Place log #8 on right bracket next to valve by sliding
grooves on sides of log into cutout on brackets. Figure
6.3.
Figure 6.3 - Log #8 Placement
2. Place log #1 over the two pins located on the rear log
bracket. Figure 6.4.
Figure 6.4 - Log #1 Placement
3. Log #2 is positioned over the two pins located in the
middle of the burner pan. The log will set at a slight
angle. Figure 6.5.
Figure 6.5 - Log #2 Placement
Log #8
Log #1
Log #2
Monessen • Mojo Installation/Owner's Manual • 4623-900 Rev. D • 04/21
4. Place log #3 at an angle over log #2 toward the back
by matching the rectangular notch on the bottom of this
log with the rectangular protrusion on log #2. Set the
notch located on the bottom of this log toward the back
over the metal bracket located to the right side of the
burner. Figure 6.6.
Figure 6.6 - Log #3 Placement
5. Place Log #4 by matching the rectangular protrusion
LG545
MLDV log 3
on the bottom of this log over the rectangular notch on
log #3. Swing the log slightly to the front and set the log
over the notch located on the upper surface of log #3.
Figure 6.7.
Log #4
Figure 6.7 - Log #4 Placement
Log #3
21