Gas Log Sets; Log Placement - Monessen Hearth NBST27NV-B Installation & Owner's Manual

5

Gas Log Sets

WARNING
• Gloves are recommended when handling logs to
prevent skin irritation from loose fibers. Logs
are fragile - handle with care.
• Use only rock wool provided with log set.
• DO NOT ADD ADDITIONAL ROCK WOOL.
Wash hands after placing rock wool. Itching may occur.
A. Log Placement
Begin on Side A, valve on left as you face the fireplace.
1. Place log #1 on burner by aligning two (2) holes on
bottom of log with two (2) pins on burner. The tallest
part of the log is on the valve side of burner. Gently
push log down until it comes in contact with burner sur-
face. Figure 5.1
Log 1
Control
Valve
Figure 5.1 - Place Log #1
2. Place log #2 on left grate tines by aligning the 'V'
notches in the log with grate tines. The groove on the
bottom of the log should be firmly seated on the grate
bar. Figure 5.2
Log #2
Figure 5.2 - Place Log #2
LG651
NBST log 2
Monessen • NBST27-B Gas Log Set Owner's /Installation Manual • 4615-900 Rev. D • 01/2020
LG650
NBST log 1
3. Place log #3 on farthest right grate tine by aligning the
'V' notch in log with grate tine. The groove in the bot-
tom of the log should sit on the filler bracket surround-
ing the pilot assembly. Figure 5.3
Figure 5.3 - Place Log #3
LG652
4. Place log #4 by aligning the 'V' notch on bottom of log
NBST Log 3
with horizontal grate bar between tines as shown in
Figure 20. Place the rectangular notch on bottom of
log onto the matching rectangular protrusion on log #1.
Figure 5.4
Log #4
Figure 5.4 - Place Log #4
5. Place log #5 by placing rectangular notch on bottom
LG653
of log onto matching rectangular protrusion on log #2.
NBST Log 4
Make sure ember or 'burnt' portion of log is facing cen-
ter of burner. Figure 5.5
Log #5
Figure 5.5 - Place Log #5
Log #3
LG654
NBST log 5
19