Table of Contents
Advertisement
- Insert the set anchor and washer onto the suspension bolts for locking the suspension bolts on
the ceiling.
- Mount the suspension bolts to the set anchor firmly.
- Secure the installation plates onto the suspension bolts (adjust level roughly) using nuts, wash-
ers and spring washers.
• Local supply
① Set anchor
② Plate washer - M10
③ Spring washer - M10
④ Nut - W3/8 or M10
⑤ Suspension bolt - W3/8 or M10
CAUTION
!
Tighten the nut and bolt to prevent unit falling.
CAUTION
!
1
Install declination of the indoor unit is very important for the drain of the duct type air
conditioner.
2
Minimum thickness of the insulation for the connecting pipe shall be 10mm.
Drainage hole
CORRECT
Old building
1 Set anchor
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
Ceiling
Drainage hole
INCORRECT
THE INDOOR UNIT INSTALLATION
New building
Safety drain hole
9
Main drain hole
Advertisement
Table of Contents
