ALL02860ND Wireless N 300Mbit Dual Band Access Point PoE Quick Installation Guide...
Page 2
RJ-45 port on the computer that will use the ALL02860ND. Ensure that the cable is securely connected to both the ALL02860ND and the Computer. 3) Connect the Power DC Inlet to the DC-IN port of the ALL02860ND and the Power to the electrical out. Please use only the supplied power adapter! Note: ALL02860ND supports both IEEE 802.3at PoE(Power over Ethernet) and regular power adapter.
Page 3
ALL02860ND) and hit enter. http://192.168.1.1 3) A login screen will appear. By default, the username of the ALL02860ND is admin and the password is admin. Enter the current username and password of the ALL02860ND and then click Login. Refer to the ALL02860ND user manual on how to change the username and password.
Page 4
To lock the ALL02860ND by reloving 3) Mount the ALL02860ND on the mounting bracket by rotating the unit clockwise about 90 degrees to secure it in place.
Page 5
2) Line up the connected T-rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps into place. Note: To protect your ALL02860ND, use the Kensington security slot to attach a cable lock (cable lock is not included).
GPL and LGPL. Written offer for GPL and LGPL source code Where such specific license terms entitle you to the source code of such software, ALLNET will provide upon written request via e-mail and/or traditional paper mail the applicable GPL and LGPL source code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
Page 14
The conformity to the above directive is indicated by the CE sign on the device. The ALLNET ALL02860ND conforms to the Council EMC Directives of 2006/95/EC and 2004/108/EC. This equipment meets the following conformance standards: EN 60950-1:2006 +A11:2009 + A1:2010 + A12:2011 EN 60601-1-2:2007 CISPR 11:2010 ED.
Need help?
Do you have a question about the ALL02860ND and is the answer not in the manual?
Questions and answers