Function Operating Part - Cuckoo CRP-HV06 Fuzzy Series Operating Instructions Manual

Function Operating Part

Preset/Auto clean
Button
Used to preset preferred
cooking time
(Refer to page 26~27)
When you use automatic
steam cleaning function.
(Refer to page 19)
Mode button
This function is used to
customize individual cooking
preference, time-setting,
voice volume setting,
keep warm temperature
setting, and power saving
movement.
Menu / Selection
button
This function is used to select from
among glutinous rice, sushi rice, mixed rice, GABA rice, Black bean, dried rice , nu rung ji, nutritious rice, nutritious porridge,
multi cook and Automatic Sterilization (Steam Cleaning), and to modify preset time. See page 14, 26.
For setting selected action with mode button and setting gaba time multi-cook time. See page 24, 25.
If no operation is done while power cord is plugged, the system while be on standby mode as shown in the figure.
(The menu on standby screen, time, voice and customized rice taste stage may differ depending on user configuration.)
If cancel button is pressed during cook, the rice cooker will go on standby mode.
Press the button until the buzzer sounds. Picture may vary depending on model.
Error Code and Possible Cause
If the product has any problems or is used inappropriately, you can follow the marks below. If error persistently shows up, in
normal using conditions or after taking recommended measures, inquire with customer service.
When the inner pot is not placed into the unit.
Problem on temperature sensor. ("
Problem on fan motor.
marks blink.
When pressing the Pressure Cook/Turbo and Timer botton, while the Lock/Unlock handle is on "Unlock"
Turn the Lock/Unlock handle "Lock".
When boiling only water.
When setting preset time longer than 13 hours
Set the preset time within 13 hours. (Refer to page 26~27)
It is appears on the display when you press Start button again, or if the cooking has finished and you've never
ever turned the handle to 'Unlock'. It can be solved by turning handle to 'Unlock' and then turn to 'Lock'.
Problem on micom power.
Problem on micom memory.
When the inner pot is not placed into the unit but the micom mistook the detachable cover or any other foreign
substance for the inner pot while Keep Warm/Reheat mode.
FUNCTION OPERATING PART
Keep Warm /
Reheat button
Used to warm or reheat.
(Refer to page 28~30)
"mark blink. )
This code indicates the function of checking for abnormality of power or product.
Pressure
Cook/Turbo Button
This function is used to start
cooking. (Refer to page 18)
Cancel button
This function is used to cancel a
selection or release remaining
steam in the inner pot.
(Refer to page 34)
When using Power saving
function
(Refer to page 31)
Set button
This function is used to select
a function or to button-lock
function. (Refer to page 31)
Display
<Standby condition screen>
Problem on environment sensor.