Cuckoo CRP-HV06 Fuzzy Series Operating Instructions Manual page 29

TO KEEP COOKED RICE WARM AND TASTY
Controlling method of warming temperature
If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature
Press "Mode" button over
1 time during warming. It displays
as picture with buzzer.At the time,
means current warming
temperature.
"M enu/Selection" button will blink, and
"Mode", "Set" and "Cancel" buttons will be
turned ON.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
Change of temperature
If you want to change cooking temperature in the standby mode, press "Mode select" button over
2 seconds, and press it 2 more times. You can change cooking temperature.
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
"mode" button 4times.
The voice says that it is
programmed warming
mode, control the
temperature you want.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
To raise temperature
To lower temperature
Press "Menu/Selection" button to raise the setting mode.
Press "Menu/Selection" button to reduce the setting mode.
Press "Menu/Selection" button to
change the temperature as
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
After setting temperature, press "Set"
button. Preset temperature will be stored
with buzzer sound.
(It will be cancelled once press "Cancel"
button or after 7 seconds without
pressing any button.)
Press "Menu/Selection" button
to change the temperature as
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
Press "Menu/Selection" button
to change as the picture(up)
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
Select the menu you want, then the press the
"Set" button and set-up time will be
automatically entered with a buzzer. (If you
press the "Cancel" button or do not press a
button within 7 seconds, the function will be
cancelled and returned to standby mode.)
Press "Menu/Selection" button
as the picture(down)
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.