Cuckoo CRP-HV06 Fuzzy Series Operating Instructions Manual page 33

If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case
When the button cannot
operate with " "
When the Pressure
"Cook/Turbo" Timer
button does not operate
with " "
When the rice is badly sticky.
When " " is showed
on the LCD.
When the time cannot be
preset.
When you smell after and
before cooking?
When the top cover cannot be
closed.
When " ", " " are
shown on the LCD by turns.
When " ", " " are
shown on the LCD by turns.
" " sign is displayed during
the cooking, warming/reheating,
or preset process is activated.
" " or " " mark shows
up during the product operation
Check points
Is the inner pot inserted?
Check the rated voltage?
Did you turn the Lock/Unlock Handle
to "Lock".
Is "pressure" lamp on?
Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
Check the rated Voltage?
Is the current time correct?
Is AM or PM set properly?
Did you set the reservation time over
13 hours?
Did you clean it after cooking?
Is the inner pot correctly inserted in the main
body?
Is the Lock/Unlock handle on the top cover
set to "Lock"?
Is there hot food in the inner pot?
Micom power is out.
The sensor is broken.
Is there inner pot in the product?
CHECK BEFORE ASKING
FOR SERVICE
Do the following
Please insert inner pot.
This product is 120V only.
Please turn the "Lock/Unlock" handle to "Lock".
Clean all the alien substances on the
temperature sensor or the bottom surface of
the inner pot.
Cut the power and contact customer service.
It is normal to get "
water.
This is only for 120V.
Set the current time. (Refer to page 14)
Check the AM and PM.
Maximum reservation time is 13 hours.
(Refer to page 26~27)
Please clean it after cooking.
Please put in the inner pot perfectly.
Please turn the "Lock/Unlock" handle to "Lock".
Pull the pressure handle to aside once.
Please cut the power and contact customer service.
Please cut the power and contact customer service.
Please insert inner pot
If the sign continuously displayed, cut the power
and contact customer service.
This function checks to see if power or product has
abnormality. If the mark shows up continuously,
contact customer service.
" when putting only