Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita BHP440 Instruction Manual

ENGLISH (Original instructions)
1. Battery cartridge
2. Button
3. Red part
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Speed change lever
8. Adjusting ring

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
Cd
........ Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
4
Explanation of general view
9. Action mode changing ring
10. Arrow
11. Graduations
12. Sleeve
13. Screw
14. Hook
15. Groove
16. Blow-out bulb
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
Intended use
END004-4
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS PERCUSSION
DRIVER DRILL SAFETY
WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
17. Limit mark
18. Rear cover
19. Screws
20. Spring
21. Arm
22. Recesed part
23. Carbon brush cap
24. Hole
BHP440
13 mm
13 mm
27 mm
ø 6.8 mm x 50 mm
M6
0 - 1,400
0 - 400
0 - 21,000
0 - 6,000
204 mm
1.7 kg
D.C. 14.4 V
BHP450
1.8 kg
D.C. 18 V
ENE039-1
GEA010-1
GEB056-2