Applications; Maintain Tools With Care; Accessories; Protecting The Environment - Stanley STST1825 Original Instruction

Dust port
Sawdust
collector

APPLICATIONS

Cutting Tips

1. Make sure the kerf is made on the scrap side of the
measuring line.
2. Cut the wood with the finished side up.
3. Always have a proper support for the wood as it
comes out of the blade.
4. Make a test cut for important cuts.
5. Always use the correct blade depth setting. The top of
the blade teeth should clear the top of the material
being cut by 1⁄8" (3 mm) to 1⁄4" (6 mm).
6. Inspect the work-piece for knots or nails before
beginning a cut. Remove any loose knots with a hammer.
7. Always use clean, sharp, properly-set blades. Never
make a cut with a dull blade.
8. When making a cut, use steady, even pressure. Never
force a cut.
9. DO NOT cut wet or warped lumber.
10. Always hold your work-piece firmly with both hands or
use a push stick or push block.

MAINTAIN TOOLS WITH CARE

Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Keep tools sharp and clean for better and safer performance.
Inspect tool cords periodically and if damaged, have repaired
by an authorized service facility.
Your power tool requires no additional lubrication or main-
tenance. There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store your
power tool in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust. If you see some
sparks flashing in the ventilation slots, this is normal and will
not damage your power tool.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed
Nut
in this manual) should be performed by authorized service
centers or other qualified service personnel, always using
identical replacement parts.

ACCESSORIES

2 Blade wrenches, 1 rip fence, 1 miter gauge and
1 push stick
Z
We recommend that you purchase your accessories from
the same store that sold you the tool. Use good quality
accessories marked with a well- known brand name.
Choose the type according to the work you intend to
undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY prod-
uct needs replacement, or if it is of no further use
to you, do not dispose of it with household waste.
Please sort it out for separate recycling.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Some local govern-
ments may require the local or municipal waste
disposal centers or retailers of new products to
provide households with electronic product
recycling services.
ENGLISH
13