Maintenance - Pacific 545411 Parts & Operating Manual

FM-20ORB & FM-28ORB FLOOR MACHINES - WIRING DIAGRAM

MAINTENANCE

Check power cord for damage. Do not operate unit if damage is found
Check grip face of pad driver to inspect for wear or debris. Replace if
needed
If equipped with dust control option, check vacuum hose and cuffs for
damage or wear
After operating, wipe machine down with a damp cloth to remove dust and
debris
Make sure pad is on pad driver at all times, even during transport and stor-
age
Clean off the motor and the base of the machine with a vacuum to prevent
dust build-up
Replace all of the isolators
Replace the bearing assembly
These maintenance procedures must be performed with the machine off and unplugged from a wall outlet. Make sure to read all safety
instructions prior to performing maintenance.
MAINTENANCE SCHEDULE FOR SERVICE
DAILY
X
X
X
X
X
11
WEEKLY ANNUALLY
X
X
X