Installing The Remote Controller; Parts Supplied; Loading The Batteries; Remote Controller Handling Notes - Pioneer AVIC-8DVD Installation Manual

Installing the Remote controller

Parts supplied

Remote controller

Loading the batteries

Remove the battery cover, and insert two alkaline (UM-4, AAA, LR03, 1.5V) batteries.
For details, see "Operation Manual".
CAUTION
• Take care to insert the batteries the right way round as shown by the + and -
marks in the diagram.
• Do not mix new batteries with old.
• Do not mix different types of batteries. Even batteries of the same size may
have different voltages.
• If the Remote Controller will be out of use for a long period, remove the bat-
teries.
• If a battery leaks, completely clean any liquid or deposits from the battery
compartment before inserting new batteries.
• The supplied batteries cannot be recharged.
• We recommend using alkaline batteries as replacements.
• When disposing of used batteries, please comply with governmental regula-
tions or environmental public institutional rules that apply in your
country/area.

Remote controller handling notes

• Always keep the remote controller protected from direct sunlight or high temperatures.
Leaving the remote controller in places exposed to direct sunlight or high temperatures
for long periods of time may cause deformation, discolouration or malfunction.
• Replace the batteries when the remote controller's performance deteriorates.
Alkaline battery
(UM-4, LR03 1.5 V)
(2 pcs.)
Holder Double-sided tape
(large)
20