Connecting The Power Cord (2) - Pioneer AVIC-8DVD Installation Manual

Connecting the System

Connecting the power cord (2)

This product
Power cord
Note: When replacing the fuse, be
sure to use only a fuse of the rating
prescribed on the fuse holder.
Fuse holder (6 A)
Fuse resistor
Fuse resistor
Yellow/black, Purple/white, Pink, Lightgreen
9
Note:
Cords for this product and those for other products
may be different colors even if they have the same
function. When connecting this product to another
product, refer to the supplied Installation manuals
of both products and connect cords that have the
same function.
Black
To vehicle (metal) body. To keep electromagnetic noise
from the vehicle body out of the mobile navigation system,
attach this lead near the main unit.
Note: The yellow, red, and orange/white leads should
be connected to the opposite side of the fusebox
terminals from the battery.
Yellow
To the terminal always supplied with power regardless of
ignition switch position.
Red
To the electric terminal controlled by the ignition switch
(12 V DC) ON/OFF.
Do not connect this lead to power source terminals to
which power is continuously supplied. If the lead is
connected to such terminals, the battery may be drained.
Orange/white
To lighting switch terminal.
See pages 7-8.