Mounting With Brackets; Installing The Remote Sensor - Pioneer SDV-P7 Installation Manual

Mounting with Brackets

Car mat or chassis

Installing the Remote Sensor

Precaution:
• Do not install on the dashboard where it may be subjected to direct sunlight. High temperatures
may result in damage to the unit.
• Install within the transmission range of the remote control signal.
Stick the supplied double-sided tape to the back of the remote sensor, and attach it to the
center console.
Tapping screw (6 × 16 mm)
Bracket
Drill 4 to 4.5 mm diameter holes.
Truss screw (5 × 8 mm)
Fig. 11
Remote sensor
Double-sided tape
Fig. 12
12