Power Source - Hyundai PR813 User Manual

Locations of Radio Controls
1. Volume Control
2. Tuning Control
3. Light Button
4. Time Button
5. Alarm Button
6. Hour Button
7. Minute Button
8. Alarm on/off Button
9. Function Control
10. Dc jack
11. Line In
12. Battery Compartment (on Button)

POWER SOURCE

This radio operates on optional/DC power (battery or adaptor)
2"AA" (UM 3 or LR 06) batteries and adaptor (out to: DC 6V 400mA with
Center positive (+) plug) not included.
BATTERY OPERATION (optional)
1. Remove the battery door on the button of the radio.
2. Following the polarity diagram shown in the battery compartment,
Insert 2"AA" (UM-3) batteries (not included) and replace the battery door.
IMPORTANT: Be sure that the batteries are installed correctly.
1. Do not mix old and new batteries.
2. Do not dispose of batteries to fire, batteries may explode or leak
AC. ADAPTOR OPERATION (OPTIONAL)
This unit may also be used with an AC adapter (not included). When the AC
Adapter is connected to the DC jack (#10), the batteries are automatically disconnected.
Please make sure to use an ac adapter with a rating or 6V DC 400mA with the following center
positive (+) polarity.
If you are using a universal adapter with an output polarity switches or polarized plugs, be sure
to set the polarity to "+".
ENG - 11 ENG - 11
ENG