Nikon COOLPIX S210 Repair Manual page 112

Hide thumbs Also See for COOLPIX S210:

Items

・ When voltage increases, connect the constant-voltage power

supply and check the voltage at Level 3 ("Battery exhausted").

Then, turn off the power, increase the voltage in increments of

0.1V and turn the SW from OFF to ON. Measure the voltage

under the following conditions.

(When voltage changes, be sure to turn off the power.)

・ Level 1 : The battery mark is turned off on the monitor LCD.

Level 1 : The battery mark is turned off on the monitor LCD.

・ Level 2 : The battery "half" mark lights on the monitor LCD.

Level 2 : The battery "half" mark lights on the monitor LCD.

Judgment standards

- R0 ･ S20 -

INC

VMA22024-R.3749.A

Remarks