Nikon COOLPIX S210 Repair Manual page 111

Items
Electric characteristics
Consumption current
Stand-by (idle) current
Start (Photography)
B. C voltage
Level 1
Level 2
Level 3
When voltage increases
Level 1
Level 2
Regulation for the
battery "half" mark
Judgment standards
・ When card is not used: 0.27mA or less (when the power switch is
OFF)
・ When card is used: 0.39mA or less (when the power switch is
OFF)
・ 12mA or less (at "Sleep")
・ 0.75mW or less (when the power switch is OFF
・ 1.1A or less (AUTO start monitor is ON.)
・ 3.63 ± 0.1V
・ 3.23 ± 0.1V
・2.78 ± 0.1V (Power OFF)
・3.8 ± 0.1V
・ 3.4 ± 0.1V
・ 85 + 5 % (23℃ )
・ 65 ± 10 % (10℃ )
・ Connect the constant-voltage power supply, and decrease the
power supply voltage until 1 sec. before the measurement. Then,
measure the voltage under the following conditions (excluding
"When voltage increases").
・ Level 1 : The battery "half" mark lights on the monitor LCD.
・ Level 2 : The "no battery capacity" warning appears on the
monitor LCD.
・ Level 3 : Power OFF
・ As for Level 1 voltage, measure the voltage when half-pressing
the shutter release button, too.
・ As for measuring the voltage at "Level 3", the power must be
automatically turned off 30 seconds after reaching "Level 2". No
regulation on voltage.
- R ･ S20 -
INC
VMA22024-R.3749.A
Remarks
Constant voltage
power supply
Ammeter